SZ Sheet Piling

[H57]

Do you know of a website where I can find the section properties for SZ sheet piling? In particular I am looking for SZ-22 sheet piling.

 

[spats]

Go to

http://www.shorelinesteel.com/spec_index.html.

There is an exel file with the properties.

 

[swearingen]

I don't know of a website, but I have it right here on my shelf:

Interlock type: H & G
Cold Formed
X-Sect. Area per Foot of Wall: 6.41in^2
Nominal Width per Section: 26.75"
Weight per Lin Ft: 48.6lb
Weight per Sq Ft: 21.8lb
Wall Depth: 9.46"
Web Thickness: 0.375"
Flange Thickness: 0.375"
Moment of Inertia per Foot of Wall: 91.9in^4
Section Modulus per Foot of Wall: 19.3in^3
Surface Area per Lin Ft: 5.75ft^2 (nominal coating area - does not include interlock surfaces)



If you "heard" it on the internet, it's guilty until proven innocent. - DCS

 

[swearingen]

I guess I typed too slowly...



If you "heard" it on the internet, it's guilty until proven innocent. - DCS

 

[H57]

Thank you