Oct 15, 2008 #1 maurelius Electrical Joined Oct 15, 2008 Messages 27 Location GB Hello all, Any idea why the option to Switch to Sheet Metal (under Applications menu in Part environment) is greyed out. I have some geometry and have saved the part but cannot switch between environments. Thanks in advance.
Hello all, Any idea why the option to Switch to Sheet Metal (under Applications menu in Part environment) is greyed out. I have some geometry and have saved the part but cannot switch between environments. Thanks in advance.
Oct 15, 2008 #2 PatCouture Mechanical Joined Jun 6, 2003 Messages 534 Location CA If you start a model in the part environment you can't switch to the sheet metal environment there is only the other way around that is working. If you don't want to lose your part then you can insert it as part copy into a sheetmetal. Of course it's only a bandaid Patrick Upvote 0 Downvote
If you start a model in the part environment you can't switch to the sheet metal environment there is only the other way around that is working. If you don't want to lose your part then you can insert it as part copy into a sheetmetal. Of course it's only a bandaid Patrick
Oct 15, 2008 Thread starter #3 maurelius Electrical Joined Oct 15, 2008 Messages 27 Location GB Ah I see, Thanks Pat Upvote 0 Downvote