Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
surface sectioning
- Thread starter 112275
- Start date
Theophilus
Mechanical
Do you need a cut-away section of the view as a sketch entity? Or do you only want to see what it looks like?
There is a sketch tool for converting the entities of items that pierce through your sketch plane called Intersection Curve. Click that tool, then the items that come through your sketch plane, and it will make a sketch entity of the items that pierce your plane where they cross the plane. Helpful for building up loft profiles, etc.
Jeff Mowry
Reality is no respecter of good intentions.
There is a sketch tool for converting the entities of items that pierce through your sketch plane called Intersection Curve. Click that tool, then the items that come through your sketch plane, and it will make a sketch entity of the items that pierce your plane where they cross the plane. Helpful for building up loft profiles, etc.
Jeff Mowry
Reality is no respecter of good intentions.
- Thread starter
- #3
- Status