Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Surface roughness 2
- Thread starter DennisP
- Start date
-
2
- #2
coachjoker
Industrial
12.5s is equal to a 500 RMS. Saw cut or rough mill finish.
Hope this helps
Coach Joker
Hope this helps
Coach Joker
- Status
Similar threads
- Locked
- Question