Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Suitable sprocket
- Thread starter zedman
- Start date
Zedman,
You say you are using ANSI RC50 double strand chain but you give metric dimensions. The metric equivilant for RC50 is ISO 10 chain. If it's ANSI, the only sprocket you can use is an RC50-2 sprocket having a 5/8" pitch. If it's ISO, use the double sprocket for that with the 15.875mm pitch.
You say you are using ANSI RC50 double strand chain but you give metric dimensions. The metric equivilant for RC50 is ISO 10 chain. If it's ANSI, the only sprocket you can use is an RC50-2 sprocket having a 5/8" pitch. If it's ISO, use the double sprocket for that with the 15.875mm pitch.
- Status
Similar threads
- Locked
- Question
- Locked
- Question