Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

suitable hardenable filler spec for sleeve repair

Status
Not open for further replies.
siavash1111

siavash1111

Mechanical
Apr 14, 2012
13
HI,

ASME B 31.4 code Described “ A hardenable filler such as non-shrink epoxy or polyester resin shall be used to fill the void between the pipe and the repair sleeve “
Anybody can give me spec of non-shrink epoxy or polyester resin which should be used between pipe and sleeve

Thanks
 
Status
Not open for further replies.

Similar threads

Inchtain
  • Question
Welding Joint Repair 1
Replies
15
Views
6K
r6155
r6155
mariolucas75
  • Locked
  • Question
Temporary Repair calculations for piping
Replies
7
Views
6K
HTURKAK
HTURKAK
mariolucas75
  • Question
off spec piping
Replies
9
Views
3K
GD2
GD2
mariolucas75
  • Locked
  • Question
Non metallic pipe inspection / repair code
Replies
0
Views
2K
mariolucas75
mariolucas75
UJJ
  • Question
Subsea Pipeline(DNV) Repair, Maintenance, corrosion prevention method
Replies
4
Views
2K
UJJ
UJJ

Part and Inventory Search

Sponsor

Back
Top Bottom