Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Structural engineering - green roofs 1

Status
Not open for further replies.

haj1

Structural
Oct 30, 2008
3
Can any one please tell me what loads should take in KN/m2 for a saturated extensive type of green roof having a depth between 75-100mm.
 
Replies continue below

Recommended for you

I would say 2 kPa per 100 mm for the saturated soil load. But the "green roof" installer should be able to give you a better number.
 
Look for information from a few different manufacturers. They usually provide this.
 
2.4 KPa is about 50psf. This is a growing green roof load of short bush/tall grass height.
 
Try the following reference if you can get hold of a copy


which should take you to

Planting Green Roofs and Living Walls
Revised and updated edition
Authors: Nigel Dunnett and Noel Kingsbury

regards HM

No more things should be presumed to exist than are absolutely necessary - William of Occam
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor