straight pole light

[engahmadalqwaqnh]

[highlight #73D216][/highlight]
hello
can anybody tell me how i can calculate the force to straight light pole after welding if the diameter of pole is 200mm and the power of piston

 

[kiwitom235]

First of all your question doesn't make any sense and second of all you haven't provided enough information.

 

[engahmadalqwaqnh]

Mrs kiwitom 235

i need to straight light pole after welding process because the pole after welding become a deflection ( banana effect )(no straight)then i need to determine the force to return the pole straight by hydraulic press .
the pole have curricular cross section with diameter 200mm and 5mm thickness and material is A36 steel. and length the pole is 12 m

 

[lukin1977]

use welding on the other side to correct the distorsion

 

[HPost]

In other words...

The pole has a bunch of thermal stress and he wants to know how big his press needs to be to make the pole straight...

It's 12 mtrs long...it wont need much

 

[berkshire]

This is also posted on thread404-392886
B.E.

You are judged not by what you know, but by what you can do.