Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
storey drift 1
- Thread starter pujan73
- Start date
-
1
- #2
Hi,
I don't think there is an option in SAP to directly assess storey drift. But u can compute one from other data tabulated in SAP.
1. Select edge joints of a frame corresponding to different storey.
Display>Show Tables>Model definitions>Analysis Results>Joint output>joint Displacement. OK
2. Sort the required displacement (Say U1) in descending order.
3. Export it to excel & calculate difference in displacement of adjacent storey, which is the drift you want.
Computation of CM.
Before you can calculate the drift of CM. you have to locate it. Again, i haven't yet discovered a way to find it directly in SAP. so calculate it yourself. Data required are. 1. Joint Co-ordinates 2. Joint load. Both can be tabulated under "Model definitions"
Once you've done that. you may calculate the storey drift of all 2-d frames (say along X dirn.) You can linearly interpolate the drift of CM based on its co-ordinate.
Hope i could make myself clear.
Have fun!
PS: this post seems to be old! neva mind if u've already found its better solution. If so.. please let me know.
I don't think there is an option in SAP to directly assess storey drift. But u can compute one from other data tabulated in SAP.
1. Select edge joints of a frame corresponding to different storey.
Display>Show Tables>Model definitions>Analysis Results>Joint output>joint Displacement. OK
2. Sort the required displacement (Say U1) in descending order.
3. Export it to excel & calculate difference in displacement of adjacent storey, which is the drift you want.
Computation of CM.
Before you can calculate the drift of CM. you have to locate it. Again, i haven't yet discovered a way to find it directly in SAP. so calculate it yourself. Data required are. 1. Joint Co-ordinates 2. Joint load. Both can be tabulated under "Model definitions"
Once you've done that. you may calculate the storey drift of all 2-d frames (say along X dirn.) You can linearly interpolate the drift of CM based on its co-ordinate.
Hope i could make myself clear.
Have fun!
PS: this post seems to be old! neva mind if u've already found its better solution. If so.. please let me know.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
