Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stiffness of Pot Bearings

Status
Not open for further replies.
KOKONIS36

KOKONIS36

Structural
Joined
Oct 28, 2001
Messages
28
Location
US

I am using the SEISAB program to get the seismic forces.Pot bearings will be used and I have to input their stiffness.Any ideas about the stiffness of both expansion and fixed bearings ?
 
Status
Not open for further replies.

Similar threads

hammads23
  • Locked
  • Question Question
Non linear Pot ptfe bearing
Replies
0
Views
260
hammads23
hammads23
ATHS
  • Locked
  • Question Question
TU load on fixed/expansion bearings
Replies
2
Views
805
BridgeSmith
BridgeSmith
schvetz
  • Locked
  • Question Question
High horizontal reactions in pot bearings on a skewed multi girder deck bridge
Replies
10
Views
780
triops1996
triops1996
NotDeadYet
  • Question Question
Vertical Component of Live Load Surcharge
Replies
3
Views
3K
jhnblgr
jhnblgr
bugbus
  • Locked
  • Question Question
Seismic isolation using conventional laminated elastomeric bearings
Replies
5
Views
1K
BridgeSmith
BridgeSmith

Part and Inventory Search

Sponsor

Back
Top