tha89sx
Automotive
- Jun 13, 2007
- 40
looking for what the bars of a typical steering system would be made of.
the bars that im looking at are on a light duty diesel pickup.(3/4 or 1 ton) 4x4
pitman arm steering.
in a y configuration.
forged, rolled etc ????
if forged are the bars bent after the forging?
the bars that im looking at are on a light duty diesel pickup.(3/4 or 1 ton) 4x4
pitman arm steering.
in a y configuration.
forged, rolled etc ????
if forged are the bars bent after the forging?
