zkatzirz
Materials
- Jul 13, 2006
- 2
I am in search of a paint that can be applied to steel and can be removed in ~10% hydrochloric Acid at 180 degrees(C) in ~2 minutes.
To add some information the paint that we apply at approximately 600 degrees (C), comes off perfectly in the acid described above, I believe this is because the polymers that are in the paint vapourize when reaching temperatures of >400 degrees (C).
Note:Hydrochloric acid is very reactive with metallics and not reactive with anything that is hydrocarbon based.
All reseponses and insight appreciated.
To add some information the paint that we apply at approximately 600 degrees (C), comes off perfectly in the acid described above, I believe this is because the polymers that are in the paint vapourize when reaching temperatures of >400 degrees (C).
Note:Hydrochloric acid is very reactive with metallics and not reactive with anything that is hydrocarbon based.
All reseponses and insight appreciated.