Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steel 1.4404 / 316L vs. 1.4571 / 316Ti - actual difference in corrosion resistance?

Status
Not open for further replies.
MartinLe

MartinLe

Civil/Environmental
Joined
Oct 12, 2012
Messages
394
Location
DE
I've asked this question in Mechanical engineering, since this is very much a wastewater engineering discussion I link it here (please discuss over there).

(I do hope this kind of linking is not against cross posting etiquette)

 
Status
Not open for further replies.

Similar threads

kwisatz_haderach
  • Question Question
Dual Media filter vs Pressure sand filter
Replies
3
Views
2K
kwisatz_haderach
kwisatz_haderach
YungPlantEng
  • Question Question
Salt Dosage vs. Capacity relationship
Replies
13
Views
7K
SamuelPrescott4
SamuelPrescott4
wright44
  • Locked
  • Question Question
Corrosion Control: Calcite for RO Permeate
Replies
9
Views
2K
wright44
wright44
eddtan
  • Locked
  • Question Question
Suction pipe diameter vs lift height
Replies
9
Views
2K
LittleInch
LittleInch
swazimatt
  • Locked
  • Question Question
Laying wastewater in deep topsoil
Replies
4
Views
6K
swazimatt
swazimatt

Part and Inventory Search

Sponsor

Back
Top