Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steady state phreatic surface with FLAC (unconfined flow)

Status
Not open for further replies.
soil1999

soil1999

Geotechnical
Joined
Oct 18, 2009
Messages
39
Location
CA
Hello,
Does any one know what groundwater BC should be applied on the downstream edge of an earth dam (water existing on the upstream but no water on the downstream side) where phreatic surface exit location can be computed via FLAC correctly.
thank u
 
Status
Not open for further replies.

Similar threads

Geotech351
  • Locked
  • Question Question
Quasi steady state in Triaxial CIU tests
Replies
0
Views
453
Geotech351
Geotech351
S
  • Locked
  • Question Question
Issues with Simultaneous Use of Model Change and Surface-to-Surface Contact in Abaqus
Replies
0
Views
2K
sara2022
S
Sjotroll
  • Locked
  • Question Question
Steady state groundwater flow analyses not converging in Plaxis2D
Replies
0
Views
1K
Sjotroll
Sjotroll
Sjotroll
  • Locked
  • Question Question
Tunnel in shallow rock with K>1
Replies
0
Views
770
Sjotroll
Sjotroll
U
  • Locked
  • Question Question
help with storage tanks on a slope
Replies
18
Views
9K
Retrograde
Retrograde

Part and Inventory Search

Sponsor

Back
Top