Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stating a range in notes

Status
Not open for further replies.
KimBellingrath

KimBellingrath

Mechanical
Joined
May 14, 2003
Messages
103
Location
US
Which is preferred?

"TEMP RANGE: -10ºF to 90ºF"
or
"TEMP RANGE: -10 to 90ºF"
 
Sort by date Sort by votes
I prefer to see the units on both numbers though I will admit, I ask myself the same question when I'm writing something similar in a report.
 
Upvote 0 Downvote
The first one is preferred with celcius in parenthesis after it. Insert a space between the degree symbol and F for readability when reduced.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
fabeljafla
  • Locked
  • Question Question
API Source Inspector Electrical Equipment (SIEE) help ............
Replies
0
Views
951
fabeljafla
fabeljafla
Tmoose
  • Locked
  • Question Question
ANSI Standard tolerances - B4.1 - but not just cylindrical fits
Replies
0
Views
993
Tmoose
Tmoose
Bartonrj25
  • Locked
  • Question Question
Making section views from a detail view
Replies
2
Views
848
SnTMan
SnTMan
Mauro Nicoli
  • Locked
  • Question Question
ANSI 16.5
Replies
6
Views
1K
Mauro Nicoli
Mauro Nicoli

Part and Inventory Search

Sponsor

Back
Top