Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Static analysis convergence issue

Status
Not open for further replies.
Killedhiphop

Killedhiphop

Mechanical
Joined
Apr 22, 2016
Messages
2
Location
IN
I am working on substructure analysis of pick up truck given in abaqus example problems manual 3.2.2.I am trying to run a static step but due to non linearity the solution is not converging. It is supposed to be a one increment step, but that is not the case when I run the simulation. Any help would be appreciated.

Thank you
 
Status
Not open for further replies.

Similar threads

IcarusAero223
  • Locked
  • Question Question
3D composite coupon convergence issue
Replies
5
Views
3K
FEA way
FEA way
A
  • Locked
Convergence Issue while performing abaqus explicit followed by standard
Replies
2
Views
3K
FEA way
FEA way
ruzfactor
  • Locked
  • Question Question
Convergence issue for a model with driver nodes
Replies
3
Views
537
FEA way
FEA way
E
  • Locked
  • Question Question
Convergence Error
Replies
1
Views
2K
FEA way
FEA way
M
  • Question Question
Press Hardening Issue
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top