We have recently moved into a new building. A gentleman in the office has asked if new toilets in public buildings have a minimum clearance from the seat to the level of standing water in the bowl? (This is a serious question and I only wish it was mine.)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Standards for Toilets
- Thread starter mflam
- Start date
stookeyfpe
Specifier/Regulator
Heck of a Friday afternoon question. Your answer may be found in one of these standards. The following sentence is from International Plumbing Code Section 420.1 concerning approval of water closets:
Water closet tanks shall conform to ANSI Z124.4, ASME A112.19.2, ASME A112.19.9M, CSA B45.1, CSA B45.4 or CSA B45.5.
Water closet tanks shall conform to ANSI Z124.4, ASME A112.19.2, ASME A112.19.9M, CSA B45.1, CSA B45.4 or CSA B45.5.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question