Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
standards for rubber lined process vessels
- Thread starter ag
- Start date
ag
There is no ASME or ASTM standard for a rubber lined tanks and vessels.
Chemical companies typically develop 'guide specifications" for metallic tanks and vessels built to ASME Section VII, API 650 or API 620. These company standards address the mechanical integrity of the tank or vessel...... the rubber lining is not considered to add any strength, it is only there for corrosion protection.
Several companies offer information about thier rubber linings. Try
Please keep us posted on what you find out....
Also, what specifically, is your application ? chemicals ?temperature, pressure etc ?
Good Luck !!!
MJC
There is no ASME or ASTM standard for a rubber lined tanks and vessels.
Chemical companies typically develop 'guide specifications" for metallic tanks and vessels built to ASME Section VII, API 650 or API 620. These company standards address the mechanical integrity of the tank or vessel...... the rubber lining is not considered to add any strength, it is only there for corrosion protection.
Several companies offer information about thier rubber linings. Try
Please keep us posted on what you find out....
Also, what specifically, is your application ? chemicals ?temperature, pressure etc ?
Good Luck !!!
MJC
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
