Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
standard +/- tolerances for plastic features 1
- Thread starter LoriW
- Start date
-
1
- #2
RichGeoffroy
Materials
Lori:
Plastics Engineering Handbook of the Society of the Plastics Industry has just what you’re looking for.
I have the 4th Edition by Joel Frados. There is a newer version edited by Michael Berins. It’s available from Van Nostrand Reinhold Company, New York.
If you get in a bind, drop me an e-mail.
Rich Geoffroy
Polymer Services Group
POLYSERV@aol.com
Plastics Engineering Handbook of the Society of the Plastics Industry has just what you’re looking for.
I have the 4th Edition by Joel Frados. There is a newer version edited by Michael Berins. It’s available from Van Nostrand Reinhold Company, New York.
If you get in a bind, drop me an e-mail.
Rich Geoffroy
Polymer Services Group
POLYSERV@aol.com
RichGeoffroy
Materials
Lori:
Dubois and Pribble's Plastics Mold Engineering Handbook edited by Buckleitner and Pribble also has the same data (at least in the edition I have).
Rich Geoffroy
Polymer Services Group
POLYSERV@aol.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question