Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standard for relief grooves

Status
Not open for further replies.
YuriJ

YuriJ

Mechanical
Joined
Oct 30, 2001
Messages
1
Location
US
I'm looking for DIN or any other National Standard that specifies sizes of relief grooves for flat straight corners. These grooves usually machined prior to final grinding providing better access for grinding wheels. I found the Standard for cylindrical parts but cannot find for flat parts.

Thanks,
Yuri
 
Status
Not open for further replies.

Similar threads

Helepolis
  • Question Question
Standard for keys and keyways/keyseats design (Aircraft)
Replies
8
Views
8K
EdStainless
EdStainless
FrancoisY
  • Locked
  • Question Question
rated standard for HVAC relating leak test?
Replies
0
Views
1K
FrancoisY
FrancoisY
Flying Whale
  • Locked
  • Solved
Creating standard-looking beam diagrams
Replies
6
Views
5K
MintJulep
M
99ishvr4
  • Locked
  • Question Question
Standard for Metal Bottle/Cylinder Formed Threads
Replies
1
Views
368
EdStainless
EdStainless
oharag11
  • Locked
  • Question Question
Detail View - solid line vs phantom? What is standard?
Replies
7
Views
2K
jassco
jassco

Part and Inventory Search

Sponsor

Back
Top