Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Standard for numbering notes
- Thread starter BAR1969
- Start date
MIL-STD-100, DOD-STD-100
When you delete a note on a dwg, you do not renumber the notes. After deletion, you add "REMOVED" in place of the note and list what the note was in the rev change.
Chris
Systems Analyst, I.S.
SolidWorks/PDMWorks 05
AutoCAD 06
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716
When you delete a note on a dwg, you do not renumber the notes. After deletion, you add "REMOVED" in place of the note and list what the note was in the rev change.
Chris
Systems Analyst, I.S.
SolidWorks/PDMWorks 05
AutoCAD 06
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Locked
- Question
