Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
St. 52-3
- Thread starter pardissss
- Start date
St. 52-3 U (1.0553) – S355J0
S: Structural Steal
J0: 27 Joule for testing temp 0 DegC (Nom. Thick. >10 / <=150 mm)
Yield ReH: 275 – 355 MPa
Tensile Rm: 450 – 680 MPa
St. 52-3 N (1.0570) – S355J2G3
S: Structural Steal
J2: 27 Joule for testing temp -20 DegC (Nom. Thick. >10 / <=150 mm)
G3: Normalised
Yield ReH: 275 – 355 MPa
Tensile Rm: 450 – 680 MPa
Lowest values are for the lowest value of the thickest section available.
Heist values are for the heist value of the thinnest section (<3 mm for Rm, <=16 mm for ReH)
S: Structural Steal
J0: 27 Joule for testing temp 0 DegC (Nom. Thick. >10 / <=150 mm)
Yield ReH: 275 – 355 MPa
Tensile Rm: 450 – 680 MPa
St. 52-3 N (1.0570) – S355J2G3
S: Structural Steal
J2: 27 Joule for testing temp -20 DegC (Nom. Thick. >10 / <=150 mm)
G3: Normalised
Yield ReH: 275 – 355 MPa
Tensile Rm: 450 – 680 MPa
Lowest values are for the lowest value of the thickest section available.
Heist values are for the heist value of the thinnest section (<3 mm for Rm, <=16 mm for ReH)
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Question