Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Specification for Pond Liner

Status
Not open for further replies.
coloeng

coloeng

Civil/Environmental
Joined
Apr 1, 2008
Messages
345
Location
US
I am looking for a good CSI format specification for Hypalon or Reinforced Polypropolene to be used as a liner for a sedimentation pond for one of our pump stations. Any help is greatly appreciated.
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
How to determine optimal DO and ORP sensor placement for a carousel-type oxidation ditch with fine bubble aeration
Replies
1
Views
8K
bimr
bimr
K
  • Question Question
Typical practice the contractor to kill the existing water service after install a new water service for a residential house.
Replies
8
Views
17K
kyap88
K
wright44
  • Locked
  • Question Question
Corrosion Control: Calcite for RO Permeate
Replies
9
Views
2K
wright44
wright44
Hasibullah
  • Locked
  • Question Question
gpm sizing for WTP/WWTP Piping gallery
Replies
1
Views
875
bimr
bimr
djcbgn
  • Locked
  • Question Question
Sodium Hypochlorite Tank for Drinking Water Well
Replies
10
Views
2K
djcbgn
djcbgn

Part and Inventory Search

Sponsor

Back
Top