Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Space time of an adiabatic fixed-bed catalytic pre-reformer
- Thread starter CDubbs
- Start date
Are you talking about space velocity? I would assume you are trying to design a pre reformer reactor and have some L / D concerns. I checked my reference manual, The Catalyst Handbook, by Martin Twigg, which is generally a very good syngas reference, but my edition doesn't have anything on pre reforming. I don't know if the new editions have anything more.
For pre reforming you will probably need to go to the catalyst manufacturers (Johnson Matthey, Haldor Topsoe, Sud Chemie, or Unicat. They can give you their recomendations for the latest high acitivty or shaped catalysts.
For pre reforming you will probably need to go to the catalyst manufacturers (Johnson Matthey, Haldor Topsoe, Sud Chemie, or Unicat. They can give you their recomendations for the latest high acitivty or shaped catalysts.
- Status
Similar threads
- Locked
- Question