Before I tie the shop up with a one time only special layup project, can anyone point me to a source for carbon fiber composite tubing near 6" square and 0.13 to .18 wall thickness. This will be used as the gantry beam in a CNC drill table. I will need a piece 74" long.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
source for 6" square carbon fiber tube with 3/16" wall
- Thread starter grv15
- Start date
Similar threads
- Locked
- Question
- Locked
- Question