Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solvent for Ethylene-Proylene-Diene-Monomer(EPDM)

Status
Not open for further replies.
23513001

23513001

Materials
Dec 11, 2004
6
HI,

Are their any solvents apart from Toulene, for EPDM.

Thank you in advance,

Sree.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Just about any paraffin hydrocarbon will dissolve it. Motor oil is a plasticizer for it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

703george
  • Question
Anti Static requirement for a non-metallic bushing
Replies
2
Views
5K
TugboatEng
TugboatEng
1
  • Locked
  • Question
What is the best nylon/polymer filament for a foldable platonic solid with living hinges?
Replies
8
Views
10K
btrueblood
btrueblood
Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
771
Buckshott00
Buckshott00
Tymon
  • Locked
  • Question
Most suitable laminating adhesive film for TPU lamination
Replies
0
Views
311
Tymon
Tymon
andradesilva
  • Locked
  • Question
Silicone rubber, material properties for stability (damped vibration)
Replies
1
Views
278
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top Bottom