Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solution combination with Ansys Workbench

Status
Not open for further replies.
qscgu

qscgu

Civil/Environmental
Joined
Oct 18, 2011
Messages
1
Location
IT
Hi,
does anybody knows how results from a Linear Strucrural Analysis can be merged with results from a Spectral Response Analysis in ANSYS Workbench? I tried with "solution combinations" but it seems to me it is possible only between two Structural Analyses.
Any help would be appreciated,
Thanks!
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
3K
struclearner
struclearner
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
LS_SMS
  • Locked
  • Question Question
Joint Reactions in Solution Combination
Replies
4
Views
1K
STpipe
STpipe
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top