Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SolidWorks Routing

  • Thread starter Thread starter jjbahnsen
  • Start date Start date
J

jjbahnsen

Guest
Is anyone aware of a tutorial or a book on the Routing module? I am particularly interested in the piping and tubing but not the electrical and cable harness capabilities. Any help would be greatly appreciated.

Jennifer
 
Here is a comment...

I found this on the Eng-Tips forum also. Little help though but it's a good suggestion.

--------------------
SBaugh (Mechanical)
30 Apr 06 10:45

Talk to your VAR, there are no books or tutorials that are out there and those that you VAR may have are not free.

Regards,

Scott Baugh, CSWP
www.scottjbaugh.com
FAQ731-376

--------------------
CADMiester
 
Routing manual

[dead link]
Try the above for a manual which is reasonable. The solidworks training manual if you can get a copy is better in my opinion.
 
Last edited:
Routing

Dear,

I have a instruction on PDF this is for SW2005 but for routing and piping this is still working good.
The only problem i have is that it is a large file 100mb so sending it by e-mail is not possible maybe you have some FTP space free to place it on?

Regards, Erwin.
 
piping

give me iur email id

i feel i can send u sum manuals for piping


regards

Deepak Gupta
 
I would appreciated if I can get the routing manual

Please, if you use the winrar, you can create a few smaller files and email me
acneves2007@gmail.com

thank you:)
 
routing

well dear i'm out of town right now


i will try to send it on monday



regards


Deepak Gupta
 
Hi

I would appreciate it if you can also send me some stuff on piping. Thanks.

jmeng100@yahoo.com.au
 
I would appreciate a copy if mailed to me.

e-mail: sandraab.gyngo@gmail.com

Thanks

Sandra Barros
 
Blank
Try the above for a manual which is reasonable. The solidworks training manual if you can get a copy is better in my opinion.

--------------------------------------------------------------------------------

I would appreciate a copy if mailed to me.

e-mail: sandraab.gyngo@gmail.com

Thanks

Sandra Barros
 
--------------------------------------------------------------------------------

I would appreciate a copy if mailed to me.

e-mail: sandraab.gyngo@gmail.com

Thanks

Sandra Barros
 
Just starting a project and have to use routing. I would like a copy of the tutorial. Thanks
seahwk2@hotmail.com
 
Please send me a copy

I am also in the need for routing information. Please send info to seahwk2@hotmail.com
 
When using the routing tool I cant get the connectors to appear in the wiring harness but only the wire. I have connections points on the connectors and the route looks good in the cable assembly.
 
Hey....

can someone send me the tutorial?

gegyman@gmail.com

THX a lot!
 
could i get a copy as well please?

dhulleman@gmail.com

thanks!
 

Part and Inventory Search

Sponsor

Back
Top