Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SolidEdge to FEA packages

Status
Not open for further replies.
richg1

richg1

Mechanical
Joined
Sep 25, 2002
Messages
77
Location
AU
Hi,

Fairly techy question: Does anyone know of the best way/method of exporting CAD data from SolidEdge to FEA packages (FEMAP in particular) for truss and beam analysis?

Any other techniques or suggestions would also be appreciated...Cheers R (mech eng)
 
Sort by date Sort by votes
Best way to get beams in FEMAP is to make a dxf and import it into FEMAP. Drawing in FEMAP is not easy, so importing a dxf is the best way in my opinion.

IJsbrand
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Vikas4auto2019
  • Locked
  • Question Question
SOLIDEDGE API
Replies
0
Views
973
Vikas4auto2019
Vikas4auto2019
J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
983
NirVidP
NirVidP
xzarrandiko
  • Locked
  • Question Question
SolidEdge 2020 Installation
Replies
1
Views
1K
Kenny_G
Kenny_G

Part and Inventory Search

Sponsor

Back
Top