Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

software in electrics design

Status
Not open for further replies.
korecat

korecat

Electrical
Joined
Aug 2, 2001
Messages
1
Location
ES
I'm interested on getting software for the dimension of the motors and drives. Do you know where I can get them? Obviously if they are free, better. I mean something like PATH PLUS from Siemens. Thanks.
 
Sort by date Sort by votes
Suggestion: Contact custom motor manufacturers. However, it appears to be an item much too much on the proprietary side.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sidpred
  • Question Question
Commutator marks in DC Motors
Replies
8
Views
5K
panter
panter
NickParker
  • Question Question
Surge diverter in RTD terminal box
Replies
2
Views
17K
panter
panter
NickParker
  • Question Question
Tie Breaker in Series and Bus duct
Replies
8
Views
16K
bacon4life
bacon4life
SA07
  • Question Question
Bolt in connection box of motor cut off
Replies
2
Views
7K
Gr8blu
Gr8blu
SA07
  • Question Question
How to test short in alternator rotor winding inside the slots?
Replies
6
Views
8K
Gr8blu
Gr8blu

Part and Inventory Search

Sponsor

Back
Top