Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SMPV sphere Leg's RF pad weld inspection

Status
Not open for further replies.
N2

N2

Mechanical
Joined
Apr 15, 2011
Messages
2
Location
IN
Hi everyone,

As per SMPV rules, I need to carry out 100% MPI of sphere leg RF pad welds. However based on visual inspection and final hydro test, can I do away with the MPI test? Does SMPV rules allow any such deviation?

Just want to enhance my statutory knowledge. Help in this regard is appreciated.

 
Status
Not open for further replies.

Similar threads

AgsMyDude
  • Question Question
B31.1 Butt Weld vs. B31.3 Groove Weld
Replies
1
Views
7K
GBTorpenhow
GBTorpenhow
mariolucas75
  • Locked
  • Question Question
Non metallic pipe inspection / repair code
Replies
0
Views
2K
mariolucas75
mariolucas75
mariolucas75
  • Locked
  • Question Question
18 " weld neck flange weld joint repair
Replies
11
Views
2K
r6155
r6155
mariolucas75
  • Locked
  • Question Question
Weld neck flange weld to pipe dummy question
Replies
12
Views
3K
mariolucas75
mariolucas75
LeoSter
  • Locked
  • Question Question
Butt weld fittings
Replies
5
Views
2K
goutam_freelance
goutam_freelance

Part and Inventory Search

Sponsor

Back
Top