Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SMA Closed-Loop motion?

Status
Not open for further replies.
mtawada

mtawada

Mechanical
Oct 30, 2002
8
I have to realize a SMA closed-loop motion. I have to do it by Simulink.

Any help will be greatly appreciated.

Thank you very much.

Tawada
 
Status
Not open for further replies.

Similar threads

zidane.imade
UMAT subroutine for SMA
Replies
3
Views
4K
IceBreakerSours
IceBreakerSours
AH_AK
  • Locked
  • Question
Static stress analysis setup for rigid body motion
Replies
2
Views
374
FEA way
FEA way
EKCP
  • Locked
  • Question
Does anyone have experience with smaller PC builders like Xi computer or Velocity Micro?
Replies
1
Views
402
geesaman.d
geesaman.d
hwa0725
  • Locked
  • Question
ABAQUS: Model not converging after turning on NLGEOM (Even with very small steps)
Replies
10
Views
1K
IceBreakerSours
IceBreakerSours
Saleh abbasi
  • Locked
  • Question
Small contact region in COMSOL
Replies
1
Views
662
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom