Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch Pallete

  • Thread starter Thread starter Zaki
  • Start date Start date
Status
Not open for further replies.
Z

Zaki

Guest
Hi guys
Can any one tell me how can I add sketches to standard palate in WF3
Zaki
 
Save a sketch in sketcher and in Palatte it will appear a Tab same as Working dir. name below it you will see those sketches.
You can also specify the path using config sketcher_palette_path

Akash
 
Status
Not open for further replies.

Similar threads

freerangequark
  • Locked
  • Question Question
Default Sketch Name
Replies
2
Views
625
freerangequark
freerangequark
Screwball_1
  • Locked
  • Question Question
Creo 10 - Sketcher
Replies
15
Views
2K
Screwball_1
Screwball_1
engineeringspread
  • Locked
  • Question Question
Single Hole Pattern from sketch
Replies
1
Views
728
DesEng1986
DesEng1986
S
Creo 6 Revolve Sketch Dimensions
Replies
0
Views
3K
saspinall
S
nanay1
  • Locked
  • Question Question
Creo Parametric Drawing - Sketcher Undo is Disable
Replies
0
Views
477
nanay1
nanay1

Part and Inventory Search

Sponsor

Back
Top