Sketch is fully define or not in catia

[Kamlesh Kumar]

I want to know that how to check that sketch that I drawn in the Catia is fully define or not?

 

[MrCATIA]

Use the Sketch Analysis tool to check if the profile(s) is closed, and if there are any extra geometry (like points that are not in construction)

Also use colors to check if the sketch is fully constrained. Green and yellow means fully constrained. White is under constrained. Red is over constrained.

 

[MrCATIA]

Here's a recent thread with a similar question:

http://www.3dcadforums.com/threads/...-but-I-have-a-lot-of-opens-how-can-I-fix-this