Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch a Hexagon with 1 Dimension

  • Thread starter Thread starter ProFishent
  • Start date Start date
Status
Not open for further replies.
P

ProFishent

Guest
Sketch a construction circle. Now sketch another of the same radius using the outside right edge of the first one as a center. Sketch one more using the outside left edge of the first one. Now you will have 6 points of intersection between the circles. Use these to sketch your hexagon.
 
Status
Not open for further replies.

Similar threads

freerangequark
  • Locked
  • Question Question
Control of a dimension or parameter in simplified rep?
Replies
1
Views
2K
3DDave
3DDave
freerangequark
  • Locked
  • Question Question
Default Sketch Name
Replies
2
Views
625
freerangequark
freerangequark
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
M
  • Question Question
Moving Radial Dimensions
Replies
7
Views
21K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top