Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulation of non-linear thin material in IDEAS for defects

Status
Not open for further replies.
mirza037

mirza037

Mechanical
Joined
Apr 13, 2005
Messages
6
Location
SE
Hey guys,

I had no answer to my question , so i found it out myself.
The bending stifness is to be changed to obtain good frequency and corresponding FRF's

Mirza
 
Status
Not open for further replies.

Similar threads

Helepolis
  • Locked
  • Question Question
Suggestion: Laser Welding System for Thin Stainless Steel & Non-Linear Weld Paths?
Replies
2
Views
2K
tygerdawg
tygerdawg
Mech 3D
  • Locked
  • Question Question
Acceptable tolerance for surface defects on pressure piping
Replies
9
Views
5K
mfgenggear
mfgenggear
N
  • Locked
  • Question Question
Assistance with FEM Simulation of Continuous Rotary Extrusion in Abaqus
Replies
1
Views
2K
SWComposites
SWComposites
8
  • Locked
  • Question Question
Are Linear guideways overkill in this design?
Replies
6
Views
3K
Orange_kun
Orange_kun
bddp9
  • Locked
  • Question Question
Brainstorming Ideas for 90 degree movement for arms on a drone
Replies
13
Views
951
ctopher
ctopher

Part and Inventory Search

Sponsor

Back
Top