Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

simulated heat treatment requirement for API 5L X65QS/X65QO SAW pipes for nace service

Status
Not open for further replies.
Ratheesh_n

Ratheesh_n

Mechanical
Joined
Dec 27, 2016
Messages
62
Location
AE
Dear All,

We have received input from manufacturer that the SAW pipe test coupons are doing simulated PWHT prior to MPQT as per API 5L.Please let us know why this simulated PWHT is doing for test coupon and whether this is required as per standard


Regards,

Ratheesh N

+918451991305
 
Status
Not open for further replies.

Similar threads

AAI74
  • Locked
  • Question Question
API 5L- pipes out of dimenisons
Replies
2
Views
3K
Vegas Consulting
Vegas Consulting
Pipedream76
  • Locked
  • Question Question
API 5L vs CSA Z245.1 for DWTT
Replies
1
Views
3K
Vegas Consulting
Vegas Consulting
S
  • Locked
  • Question Question
API 5L mass per unit length
Replies
3
Views
4K
Vegas Consulting
Vegas Consulting
nabeel3
  • Question Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting
alanisphoenix
  • Locked
  • Question Question
marking API 5L
Replies
1
Views
633
Gr8blu
Gr8blu

Part and Inventory Search

Sponsor

Back
Top