Simulate cooled block

[feikebrouwer]

Hello,

I want to simulate a steel block with water-cooled holes. On top of the block is another steel block (374 deg Fahrenheit) that has to be cooled by water-cooled block.
How can I simulate the heat distribution (and change) in the water-cooled block with Solidworks? I tried, but can't find the solution.

Thanks a lot!
Feike

 

[JMirisola]

You'll need SolidWorks Simulation Professional to do it.

Jeff Mirisola, CSWP
Design Manager/Senior Designer
M9 Defense
My Blog

 

[321GO]

Floworks would also be an option.

"If you have an important point to make, don't try to be subtle or clever. Use a pile driver. Hit the point once. Then come back and hit it again. Then hit it a third time - a tremendous whack."
Winston Churchill