Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

similar software question

Status
Not open for further replies.
Set06

Set06

Mechanical
Joined
May 26, 2006
Messages
4
Location
US
Hi All,
I'm running Pamcrash explicit and require faster solves. I have a dual core, 64bit, 3.2ghz, 3Gig, system. I'm told i get get an additional software token for 10K+ to enable SMP runs.
Does anyone know a workaround to enable the second processor to work with the solver?

thanks for the help

(I posted in the algor section also, I apologize for bombarding those of you in both forums)

 
Status
Not open for further replies.

Similar threads

ShiningEngineer
  • Locked
  • Question Question
Understanding of Material Calibration Question
Replies
4
Views
1K
ShiningEngineer
ShiningEngineer
liq001
  • Locked
  • Question Question
Question about passing information from VUSDFLD to VFric_COEF/Vfirc
Replies
1
Views
2K
liq001
liq001
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S
Tom690
  • Locked
  • Question Question
Thermal stress question
Replies
7
Views
421
FEA way
FEA way
SinaPeugeot
  • Locked
  • Question Question
Applying pressures from another software to Abaqus (pressures varying with time and location)
Replies
2
Views
428
SinaPeugeot
SinaPeugeot

Part and Inventory Search

Sponsor

Back
Top