RomanSantangelo
Civil/Environmental
- Jan 9, 2003
- 2
I have to treat 1200 m³/day of raw water from a well, with a content of about 135 ppm silicate expressed as CaCO3. I have to reduce its content to 10-15 ppm before an ultrafiltration treatment.I know that is possible with a flocculation with MgO but till now I haven't practical experience of it with this flow rate.
It must be mentioned that this raw water has a high conductivity (1500 microsiemens). What can you suggest me to reach a good result?
It must be mentioned that this raw water has a high conductivity (1500 microsiemens). What can you suggest me to reach a good result?