Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Siemens NX12 Extraction Path

Status
Not open for further replies.
Mark Fletcher

Mark Fletcher

Aerospace
Joined
Feb 19, 2020
Messages
1
Location
GB
Hello All.

Is there anyway of extracting the output or the co-ordinates from the path generated when using extraction path
 
Status
Not open for further replies.

Similar threads

2_BIG
  • Locked
  • Question Question
Filename Extraction
Replies
1
Views
3K
cowski
cowski
Nahid Mubin
  • Question Question
Siemens NX Center Constraint
Replies
2
Views
4K
cowski
cowski
S
  • Question Question
Reverse Engineering Surface Modeling from STL in Siemens NX
Replies
0
Views
4K
Sennja
S
serdart
  • Question Question
Siemens NX 2000: Pipe bend coordinates extracting
Replies
0
Views
1K
serdart
serdart
skibum13
  • Locked
  • Question Question
NX12 Color Palette Size Issue
Replies
2
Views
723
skibum13
skibum13

Part and Inventory Search

Sponsor

Back
Top