SIEMENS 1GG5 DC Motor

[Feg]

Hi Guys,

I am wondering if anyone can point me in the direction of a company that offer spares such as brush holders and springs for the SIEMENS 1GG5 DC Motor. I have been on to SIEMENS and while this product is still in the catalogue my motor is over 20 years old and no information is on there system and so they cannot help.if you know any independant parts supplier this would be a big help.

Thank you

F.E.G

 

[DickDV]

Custom brushes can be sourced from aftermarker suppliers. Google "DC Motor Brushes" for suppliers. The rest of the internal components are going to be difficult to find with the possible exception of brush springs.

 

[Feg]

Hi DickDV

Yea I have no problem with the brushes, its the holders which are my problem. thanks

 

[Skogsgurra]

Winder shops?

They repair old motors. Should have spares available.

Gunnar Englund

http://www.gke.org

--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...

 

[ScottyUK]

20 years isn't that old. I think Siemens DC motor operation is based out of Germany - if you talk to the right part of the Siemens empire I bet someone can help you.


----------------------------------

If we learn from our mistakes I'm getting a great education!

 

[ozmosis]

feg
refer to the attached link and there is a section on "ordering spare parts":

http://support.automation.siemens.com/AU/view/en/9271824

then I would contact your local Siemens representative. There is usually one lurking close by...