Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Show regions where the von mises stress is above 250 N/mm^2

Status
Not open for further replies.
Shindey

Shindey

Geotechnical
Joined
Dec 29, 2010
Messages
39
Location
AE
Hi All,
How can I get stress plots only on regions where stresses exceed 250 MPa?The regions below the stress value of 250 MPa should remain gray.
Rgds
Shindey
 
Sort by date Sort by votes
Options -> Contour -> Limits -> Specify whatever min/max limits you want
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
ABAQUS IS NOT RUNNING THE MODEL
Replies
3
Views
3K
FEA way
FEA way
Zivy98
  • Question Question
Why does the electrical potential not go the way I wanted?
Replies
3
Views
7K
FEA way
FEA way
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way
F
  • Question Question
What is XFEM
Replies
3
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
8K
polak7
polak7

Part and Inventory Search

Sponsor

Back
Top