Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Show Failure of Material

  • Thread starter Thread starter sudhishjoseph
  • Start date Start date
Status
Not open for further replies.
S

sudhishjoseph

Guest
Hello,


Is it possible to show failure of material in Mechanica(Structure) that is in the result window if the force applied to a component exceeded its limit instead of the model max. & min. Von Mises Stress. being shown.


Thank you,


Sudhish
 
you can define Failure Index as an analysis measure before running analysis.


Israr
 
Thank you a lot ,Israr. Will try it out.


Sudhish
 
Status
Not open for further replies.

Similar threads

S
Dynamic Analysis of Theo Jansen walking mechanism
Replies
0
Views
37K
Sai Rakesh
S
A
Pro/Mechanica Material Assignment and Meshing for Assemblies
Replies
0
Views
6K
AMega
A
L
Test Defined Hyperelastic Materials
Replies
1
Views
4K
dr_gallup
D
V
How to properly set up the limits of a simulation?
Replies
0
Views
7K
Villa
V
R
Status of MDO
Replies
0
Views
3K
rework
R

Part and Inventory Search

Sponsor

Back
Top