Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sheetmetal Bend Lines no coming up in flat pattern View

Status
Not open for further replies.
supercub

supercub

Materials
Joined
Dec 22, 2011
Messages
41
Location
US
When I make a drawing of a sheetmetal part and select one view as flat pattern, I get bend notes but no bend lines. I went through the properties and still no bend lines. Any ideas?
 
Sort by date Sort by votes
Try and go to View\Sketches and make sure they are selected.

Scott Baugh, CSWP [pc2]
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader
"If it's not broke, Don't fix it!"
Click to expand...
faq731-376
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

arb65912cmco
  • Locked
  • Question Question
I can not select face in patterned components in upper level assembly
Replies
1
Views
953
arb65912cmco
arb65912cmco
CAD2015
  • Locked
  • Question Question
Rotate a view in the direction of a line..................
Replies
17
Views
1K
jassco
jassco
C
Bends Will not flaten
Replies
0
Views
3K
Colinu
C
ASHWA
  • Locked
  • Question Question
SHEETMETAL STANDARDS
Replies
12
Views
631
ASHWA
ASHWA
drcole
  • Locked
  • Question Question
sending a flat pattern to a sheet metal shop
Replies
7
Views
929
ctopher
ctopher

Part and Inventory Search

Sponsor

Back
Top