Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sheet Metal welding

  • Thread starter Thread starter feeh
  • Start date Start date
F

feeh

Guest
I'm trying to weld two flanges I've made on a sheet metal. These two faces are not touching, they are 0.05mm apart.
Any kind of weld would be ok. Or any viable solution
It is a single piece sheet metal non 90-degree flanges
View attachment 1220

Thanks
 

Attachments

  • weald.jpg
    weald.jpg
    14.6 KB · Views: 6
You must log in or register to reply here.

Similar threads

S
  • Question Question
Modifying Sheet metal parts
Replies
3
Views
9K
SBaugh
SBaugh
Andrejs Menkins
  • Locked
  • Question Question
Macro for DXF export (sheet metal) from part files with revision suffix
Replies
2
Views
1K
Andrejs Menkins
Andrejs Menkins
drcole
  • Locked
  • Question Question
sending a flat pattern to a sheet metal shop
Replies
7
Views
892
ctopher
ctopher
dklarz
  • Locked
  • Question Question
Sheet Metal Dome
Replies
4
Views
582
SBaugh
SBaugh
Imposter666
  • Locked
  • Question Question
What is the best practice to 3D model and detail weldments that have sheet metals as a part of them.
Replies
11
Views
1K
Jboggs
Jboggs

Part and Inventory Search

Sponsor

Back
Top