Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SHEET METAL SB FLAT SOLID - LAYER PLACEMENT 1
- Thread starter CAD2015
- Start date
-
1
- #2
JohnRBaker
Mechanical
You can assign them to whatever layers that you wish, but there is no automatic scheme to do so.
But that might not even be necessary as we've already provided a means to manage both the 'Flat Solid' and 'Flat Pattern' and that is by automatically add them to their own explicit Reference Sets so that downstream, where it's most critical, you can control which manifestation are you using, formed, flattened or just the 2D layout for Drafting and Manufacturing.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
But that might not even be necessary as we've already provided a means to manage both the 'Flat Solid' and 'Flat Pattern' and that is by automatically add them to their own explicit Reference Sets so that downstream, where it's most critical, you can control which manifestation are you using, formed, flattened or just the 2D layout for Drafting and Manufacturing.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
- Status
Similar threads
