Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sheet Metal domain definition. in NX.....................

Status
Not open for further replies.
CAD2015

CAD2015

Automotive
Joined
Jan 21, 2006
Messages
2,079
Location
US
Hi,

I receive job offers( I am not employed at the moment) that requires sheet metal experience.
How could be defined (in the job requirements area) the Sheet Metal tool that creates 3D solid parts (with thickness) other than the Sheet Metal domain that referees at body design (solid parts without thickness)?

Thanks!

MZ7DYJ
 
Status
Not open for further replies.

Similar threads

KKKing
  • Question Question
How to Chart Dim when using PMI dim in Sheet metal
Replies
0
Views
5K
KKKing
KKKing
Nahid Mubin
  • Question Question
Standard Practice for Drafting in NX
Replies
3
Views
8K
GigaManf
G
Jashe
  • Question Question
Sketch Failure Message in NX
Replies
3
Views
2K
Jashe
Jashe
G
  • Question Question
NX Journal
Replies
15
Views
28K
Toost
Toost
S
  • Question Question
Reverse Engineering Surface Modeling from STL in Siemens NX
Replies
0
Views
4K
Sennja
S

Part and Inventory Search

Sponsor

Back
Top