Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sharp Vee Thread on Tubing
- Thread starter booob630
- Start date
The gage has to be set to a working master at a test lab.
The report you receive will have an offset dimension. This dimension and API 6A 19 Section 10.2 page 140 and page 379,and API 5B, and API BUL 5B, will help you establish your gage points and tolerance. My question is what is exactly stamped as identification on the gage.
The report you receive will have an offset dimension. This dimension and API 6A 19 Section 10.2 page 140 and page 379,and API 5B, and API BUL 5B, will help you establish your gage points and tolerance. My question is what is exactly stamped as identification on the gage.
- Status
Similar threads
- Question
- Question
