Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting the order of Block Attributes

Status
Not open for further replies.
AnthonyBoyd

AnthonyBoyd

Industrial
Joined
Aug 15, 2014
Messages
2
Location
US
I came across thread1480-359861 but have a slightly different question.

If I can't change the order of Attributes once the Block has been defined, how do I set the Attribute order during definition?

many thanks.
 
Status
Not open for further replies.

Similar threads

sdz
  • Locked
  • Question Question
Setting default layer colours
Replies
0
Views
778
sdz
sdz
GILLZ
  • Locked
  • Question Question
thread1480-431555 When I use the c
Replies
0
Views
1K
GILLZ
GILLZ
AndresKr
  • Locked
  • Question Question
How and if at all can I make a click and count block?
Replies
0
Views
815
AndresKr
AndresKr
PatCouture
  • Locked
  • Question Question
Block replace
Replies
0
Views
517
PatCouture
PatCouture
bjlasota
  • Locked
  • Question Question
Probably a basic question: Setting up units when pasting multiple entities in from supplied drawings
Replies
1
Views
319
Ericsonbirdman
Ericsonbirdman

Part and Inventory Search

Sponsor

Back
Top